Abstract
Introduction Autologous fat grafting has favourable potential as a regenerative strategy and is the current gold-standard to repair large contour defects, as needed in breast reconstruction after mastectomy and traumatic soft tissue reconstruction. Clinically, there is a limit on the volume of lipoaspirate which can be utilised to repair a soft-tissue defect. Surgical complications are the result of poor structural fidelity of lipoaspirate and graft resorption as a filling material and are hindered further by poor graft vascularisation. This study aims to develop injectable lipoaspirate-derived adipose tissue grafts with enhanced biologically and clinically-admissible structural and functional properties adopting light photocrosslinking of unmodified lipoaspirate. Methods Patient-derived lipoaspirate was harvested and crosslinked using novel photoinitiator and exposure to visible light (wavelength 450nm) in surgery, establishing bonds between extracellular matrix (ECM) proteins within the material. The degree of crosslinking was tuned (photoinitiator concentration, light exposure, light intensity) and covalent bond formation measured using mass spectrometry. To predict patient response, SWATH-MS was used to identify differences in patient ECM and crosslinked grafts were implanted in vivo using a subcutaneous mouse model. Functional vessel formation and resorption were quantified using micro-CT and tissue-remodelling was assessed via histology. Results There was an increase in the relative abundance of covalent bonds present with increasing degree of crosslinking. When injected, crosslinked lipoaspirate had better shape fidelity compared with native lipoaspirate – demonstrated by a smaller fibre diameter. Crosslinked lipoaspirate remained viable over long term culture and resulted in more predictable resorption profiles when implanted in vivo. Conclusions The crosslinking approach described here is tunable and functional across different patient samples. Improving the structural properties of lipoaspirate through minimal manipulation has clinical utility for the delivery of grafts with higher shape fidelity and therefore increased graft survival when implanted.