Abstract
Abstract Objectives Wax typodonts are widely used as pre‐clinical teaching tools to test and research the complex force systems created by archwire activations, however, a limitation is the inability to quantify the resultant statically indeterminate tooth movements. The aim of this study was to develop an analogue‐to‐digital typodont system to quantify the effects of archwire activations on individual typodont teeth in three dimensions. Methods The typodont system was developed using CAD/CAM technology. Posterior expansion, squared, tapered, asymmetrical arch forms and reversed curve of Spee activations were tested with three repeats. The resulting three‐dimensional movements of individual typodont teeth were assessed with six degrees of freedom ( df ). Cartesian coordinate systems were set for each tooth. Mesio‐distal, bucco‐lingual and intrusive–extrusive movements were assessed as changes in the location of the geometrically estimated centre of resistance in the x , y and z axes, respectively. Torque, tip and rotation movements were assessed as the rotations around the mesio‐distal, bucco‐lingual and intrusive–extrusive axes, respectively. Results Individual typodont tooth displacements from each activation could reliably be described with six df . The transversal‐to‐sagittal movement ratio ranged from 2:1 to 7:1, depending on the activation. Asymmetrical arch form activations caused a midline shift and affected the lateral overjet. Reversing the curve of Spee led to intrusion of incisors and second molars, extrusion of premolars and first molars and pronounced first and third order effects. Conclusion The digital typodont system is a promising teaching tool. The tested activations have implications in three dimensions, which should be considered when planning tooth movements.