Show simple item record

dc.contributor.authorSmith, Catherine Ann
dc.contributor.authorLowe, Bronwyn J.
dc.contributor.authorBlair, Kate
dc.contributor.authorCarr, Debra
dc.contributor.authorMcNaughton, Andrew
dc.date.available2017-04-06T21:55:02Z
dc.date.copyright2013
dc.identifier.citationSmith, C. A., Lowe, B. J., Blair, K., Carr, D., & McNaughton, A. (2013). Identification of historical plant material using micro-computed tomography. Studies in Conservation, 58(3), 256–268. doi:10.1179/2047058412Y.0000000043en
dc.identifier.issn0039-3630
dc.identifier.urihttp://hdl.handle.net/10523/7280
dc.descriptionThis is a pre-printen_NZ
dc.description.abstractThis work investigates the use of micro-computed tomography (micro-CT, µCT) for identification of New Zealand plant leaf material from artefacts. Micro-computed tomography was explored as a result of difficulties in preparing transverse sections from aged plant material from artefacts to compare with reference slides for microscopic identification of plant species. The three plants investigated (harakeke1, New Zealand flax, Phormium tenax, J.R.Forst. & G.Forst; tī kōuka, cabbage tree, Cordyline australis, (Forst.f.) Endl,; kiekie, Frecinetia banksii A.Cunn.) were/are commonly used by Maori for the manufacture of objects often found in cultural institutions. Contemporary and historical specimens (from artefacts) of plant leaf material were investigated. Contemporary specimens were viewed using micro-CT and showed identifiable features compared with micrographs of transverse sections from reference material. Diagnostic features of each plant species were then named and measured, providing the basis for development of an identification key using both visual and objective criteria. Positive identification of historical specimens using this key varied across plant species and according to level of ageing and processing. Despite this, micro-CT had several advantages over traditional transverse sections: samples were not prepared for, or altered by, analysis, and numerous cross-sections across the entire sample could be easily viewed to locate identifiable characteristics. While measurable criteria supplied apply only to the three named New Zealand plant species, this paper provides methods that could be applied to the identification of other aged plant leaf material. Knowledge of plant anatomy at the level of major cell and tissue types (for e.g. parenchyma, sclerenchyma and epidermis) is sufficient for the level of analysis carried out in this study.en_NZ
dc.format.mimetypeapplication/pdf
dc.language.isoenen_NZ
dc.publisherManey Publishingen_NZ
dc.relation.ispartofStudies in Conservationen_NZ
dc.subjectPlant material identificationen_NZ
dc.subjectMicro-computed tomographyen_NZ
dc.subjectMāori textilesen_NZ
dc.titleIdentification of historical plant material using micro-computed tomographyen_NZ
dc.typeJournal Articleen_NZ
dc.date.updated2017-04-05T04:36:17Z
otago.schoolCentre for Materials Science and Technologyen_NZ
otago.relation.issue3en_NZ
otago.relation.volume58en_NZ
dc.identifier.doi10.1179/2047058412Y.0000000043en_NZ
otago.bitstream.endpage268en_NZ
otago.bitstream.startpage256en_NZ
otago.openaccessOpenen_NZ
dc.description.refereedPeer Revieweden_NZ
 Find in your library

Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record